← Back to Arrange It

Arrange It — Tester Guide

Arrange It takes any score — piano piece, orchestral work, band chart, lead sheet — and produces a faithful arrangement for the ensemble you choose. It never composes or improvises: every note in the output is provably derived from the original. Your job as a tester is to arrange real music, listen with a musician's ear, fix what needs fixing, and send your corrections back so the engine learns.

New here? The overview page says what Arrange It does — and will not do — in a few screens.

Contents
  1. Uploading a score · transcribing a recording · hearing it against the score · checking the voice · writing it again
  2. Arrangement options
  3. The desk: the set sheet, outputs and buttons
  4. The editor page
  5. Playback
  6. Printing: score, parts and booklet
  7. Review arrangement — the automatic checker
  8. Fixing by chat: plain language and commands
  9. Editing the arrangement on the score · keyboard shortcuts
  10. Score details, tempo and versions
  11. Choosing the source parts yourself
  12. PDF scores (OMR, beta)
  13. Uploading corrections — the most valuable thing you can do
  14. The recommended workflow
  15. Limits and known behaviors
  16. Reporting problems

1. Uploading a score

Use the New set panel on the right of the desk (the main page). Accepted files:

TypeNotes
.musicxml / .xml / .mxl The best input. Exports from MuseScore, Sibelius, Finale, Dorico, or musescore.com downloads.
.msczNative MuseScore files — converted automatically on the server.
.mid / .midiWorks for a MIDI made by notation software (MuseScore, Finale, a sequencer, this app's own downloads): each track is a part, its name and instrument come from the track, the time signatures and key of the conductor track apply to every track, and every pitch is taken at sounding pitch whatever the track is called ("Trumpet in B♭" is the instrument, not a transposition). MIDI carries no articulations, slurs or dynamics. A MIDI transcribed from audio (an AI music site's export, a recorded performance) has no real metre and lands on no beat grid — it will arrange, but the bars and rhythms will not be right.
.zipZip-wrapped scores (common from phone downloads) are unwrapped automatically.
.pdfBeta — optical recognition, see section 12.
audio (.mp3, .wav, .m4a, .flac, .ogg)Experimental; not enabled on the public server. Under Arrange the recording is pitch-detected and then arranged for the ensemble (with the multi-instrument model where the server has it, which takes minutes; otherwise, or when separate stems first is ticked, with the simpler detector). To get the notes themselves as a score, use Transcribe (below).

Files that contain several pieces (hymnals, suites exported as one file) are detected and split — you get one arrangement per piece, each with its own downloads.

Piano scores are automatically expanded into separate voice lines (melody, inner voices, bass) before arranging, so a solo piano piece becomes a real ensemble texture, not a chord dump. The Include piano checkbox also does this for piano parts inside larger scores. A left-hand bass line that covers more octaves than the instrument has is folded into the instrument's bottom octave note by note, except that a run of four or more notes moving one way is kept whole, so a rising arpeggio still rises. A piano part gives four lines (two from each hand); when the ensemble has more chairs than that, the next chair plays the chord notes those four leave out, where there are enough of them, and only otherwise doubles the bass. On instruments that cannot reach a piano's bass the bass note is lifted into the chord; a chord note left a tone or semitone under it is then moved up an octave, where that keeps its own line smooth, so the bass stays the lowest note.

Transcribing a recording

The New set panel has two modes. Arrange is everything else in this guide. Transcribe turns a recording of one instrument into a score and opens it in the editor — nothing is arranged, no ensemble is chosen. The Arrange / Transcribe tabs appear only on a server that carries the transcription models; where they are absent (the public server, for now) the panel is the Arrange form alone.

ControlWhat it does
Drop the recordingAn .mp3, .wav, .m4a, .flac or .ogg file, up to 25 MB.
● RecordRecords a take from this device's microphone (the browser asks for permission the first time). Press ■ Stop when done; the take can be played back, discarded or recorded again, and it stays on your device until you press Transcribe. Ten minutes at most. Play close to the microphone in a quiet room — the browser's speech filters are switched off so sustained notes survive, which also means room noise is not removed.
InstrumentThe part is written the way that instrument reads it: its transposition (a B♭ trumpet part is written a tone above what sounds), its clef and its range — a detected note the instrument cannot play is moved by octaves into the range. Piano gives two staves, split at middle C. Ensemble — every instrument (offered when the server has the multi-instrument model) is for a recording of several instruments: you get a short score at concert pitch with one staff per instrument family — Brass, Strings, Reeds, Flutes, Voices, Piano, Guitar, Bass, Organ — a grand staff where the family spans both clefs. The model tells families apart, not players: a brass quintet arrives as one Brass staff of five voices. To give each line to a player, correct the short score, download the MusicXML and give it to Arrange. A singer the model hears gets a Voice staff at the top, and a bass line keeps its own Bass staff even when it holds only a few of the notes. Percussion is left out, and a few notes the model heard as another family are written with the nearest one (the log says how many). It takes roughly one to three times the recording's length. Song — voice and piano (offered when the server has the stem separator) is for a recorded song, a singer over a band: the singer is separated from the band first, the tune is written on its own Voice staff, the band becomes a piano part under it — the bass line in the left hand, and in the right hand the song's chords, struck where the band strikes. The chords are read from the sound of the band itself and named above the voice staff (C, Am, G7, G/D); the right hand plays the notes of each chord that were heard, and supplies a chord note or a bass note the detector missed. The drums are left out. Where the server has the singing model, the sung notes are read by a model trained on singing (on labelled pop songs it gets about four notes in five right, against two in three for the pitch tracker used otherwise); the log says which read the voice. It takes roughly one to two times the recording's length, and the desk stays usable meanwhile.
MetreDetect listens for three things: whether the beat divides in two or in three (a beat in three is written in 6/8, 9/8 or 12/8), whether the bars are three beats or four, and where the first downbeat falls — notes before it become an upbeat. It is right about the metre on most recordings; what it cannot know is whether a slow piece is written in quarters or in eighths, so a slow movement may come out at twice the tempo with every note twice as long. When you know the metre, choose it: 4/4, 3/4, 2/4, 6/8, 9/8 or 12/8. (The editor can also change the time signature afterwards; it re-bars the part.)
BeatWhich pulse counts as the beat. As detected uses the pulse the tracker locks onto, which in a slow piece is often the half beat: the score then shows twice the tempo, every note twice as long and twice as many bars. Half as fast counts every other pulse, so the same music is written in notes half as long at half the tempo. Twice as fast does the opposite, for a fast piece that came out in notes too short. The sound is the same either way; only the note values and bar lines change. It has no effect in 6/8, 9/8 and 12/8 when the beat was heard to divide in three.
The recording has an accompanimentSeparates the instrument from a backing track before detecting pitches (voices from the vocal stem, tuba and double bass from the bass stem, everything else from the remainder). Slower, and only worth it when there really is a band behind the soloist.

The finished job appears on the desk as transcribed, with the recording as its source and Transcription as its file: Open in editor to play, correct, print and export it (MusicXML, MIDI, PDF, .mscz) like any score. Downloads keep the recording's name, with _edited once you have changed something.

Hearing the recording against the score

In the editor, a transcription has a Score / Both / Recording switch beside Play. Recording plays the recording you uploaded while the cursor moves through the score; Both plays the two together, beat for beat, so a wrong note or chord clashes at the place it is written. Everything else about playback still applies: start from a selected note, loop a bar, slow the tempo, and flip the switch while it plays. The recording follows the score's steady tempo, so where the players pushed or held back it is stretched very slightly to stay in step. Correcting notes does not disturb this; inserting or deleting bars does, from that bar on. Transcriptions made before 14 November 2026 have no switch — use Write again on one that has the row, or transcribe the recording again.

Check: the written voice against the singer

A song's transcription (voice and piano) has a red Check button beside the Score / Both / Recording switch. It compares the voice staff, as it stands on the page, with the singer's pitch in the recording and marks the places where they disagree: a red ring on a note the singer is not on (the list says which pitch is sung), on a note under which nothing is sung, on a note that begins on another sixteenth than the one it is written on ("begins a sixteenth earlier than written: on beat 2.5"), or on a note the singer holds clearly shorter or longer than written ("written a half note; the singer stops after about a quarter"); a red corner where something is sung and no note is written. The list at the right names each place — click one to go to its bar, or Next place to step through them, then press Play (in Both) to hear it.

Check marks; it changes nothing. Correct the note, press Check again, and its mark is gone. What it can judge is pitch, where notes begin and how long they are held; it does not look at the piano part. A length is marked only when it is out by about an eighth or more — a breath before the next note is not a mistake. Where a song's off-beat notes are all played a little late (between the eighth and the last sixteenth of the beat), the check says so and treats that place as the off-beat eighth: notes sung there but written on the last sixteenth are marked. The singer is read twice, by two unrelated methods: a solid ring is a place both readings agree on, a dashed ring is one reading's word against the other — worth a listen, less likely to be wrong. Where the two readings give different pitches for a note the list says so. Your ear in Both is still the final word. Songs transcribed before 14 November 2026 kept no singer's pitch: transcribe them again.

Write again

Hearing the notes is the slow part of a transcription; what is most often wrong is how they were written down — every note twice too long, the wrong metre, the barline a beat early. A transcribed set therefore carries a Write again row: choose what to change and the notes already heard are written down again in a few seconds, as a new set. The first one, and anything you edited in it, stays as it is.

ChoiceWhat it does
MetreThe metre to write in; Detect reads it from the recording as before.
BeatHalf as fast when every note came out twice too long, Twice as fast when twice too short.
TempoBeats a minute as you count them. The beat is written at whichever of the three levels (as tracked, half, twice) is nearest that number, and a tempo decides instead of the Beat choice. A tempo that is not near any of them cannot be reached this way — the log says so — and needs the recording transcribed again.
PickupHow many beats sound before the first barline: None when the first note opens a bar, 1 beat for an upbeat of a beat or part of one, and so on. An upbeat is written after rests in bar 1. As heard leaves the barlines where they were found. Leave out the lead-in keeps those barlines but drops what sounds before the first one — a stroke or a count before the music proper — so the score begins on beat 1 of bar 1.

Write again changes only how the notes are written, never which notes were heard. Transcriptions made before 14 November 2026 did not keep their notes and have no such row; transcribe those recordings again.

The sung line of a song in 4/4, 3/4 or 2/4 is written as the rhythm the singer meant, not note by note at the nearest sixteenth. Where the song's sung notes gather on the beats and half beats, a note begun a little early or late is written on its beat or half beat; sixteenths are kept where two notes follow each other that quickly, or where the song as a whole is sung in them. A bar that is sung again elsewhere in the song is heard as one rhythm: each of its notes is placed where the repeats agree. The check of the written voice follows the same rule and does not ask for a sixteenth in a line written in eighths. This smooths real pushes too: a single anticipation in a plain line is written on the beat — move it in the editor if you want it. A singer's slide into a note (a short step below or above it, with the pitch still moving) is written as part of that note, which begins where the slide began, and so is a scoop: a syllable begun a step under the note and held there for less than a fifth of a second before going up; a held note sung with vibrato is one note. Doubtful notes outside the song's key are settled by the key: a held note sung exactly between two pitches is written as the one that belongs to the key, and a very short note outside the key (a scoop, a fall at the end of a phrase) is joined to the note it touches or left out. A note outside the key that the singer holds is always written, and so are short notes on the same pitch close to it.

The piano's chords are read from the band. Where the band leaves a chord's third open (neither the major nor the minor third clearly heard) and the singer holds one of them for a quarter of the chord or more, the chord is written with the singer's third, so the piano does not play F under a sung F sharp. Where the band plainly plays its own third, the chord stays as the band has it. A single note heard alone (a bass walking from one chord to the next) is not given a chord from outside the key: it is written as a chord of the key that contains it, usually with that note in the bass (C, Em/B, Am).

A song in 4/4, 3/4 or 2/4 is written so that the beats can be seen: a note that crosses a beat it did not begin on is written as tied values (a note sung from the last sixteenth of a beat is a sixteenth tied to the rest of its length), only the plain syncopations stand as one value (eighth – quarter – eighth, quarter – half – quarter), and a rest never runs over a beat. A sung note that stops between eighths is written to the next eighth. Songs written before 14 November 2026 keep their old values until you use Write again.

What the transcription works out by itself: the notes and their lengths, the tempo, the metre unless you chose it, and a key signature with the notes spelled in that key. On the piano, faint notes an octave or two above a struck note — overtones the detector hears — are left out; an octave you actually played stays.

Ornaments on the piano. Two notes a step apart taking turns very fast are written as one note with a trill sign; a wider pair (an octave, say) as both notes held with a tremolo sign; a very short note leaning into a longer neighbour as a grace note before it, so the main note stays on its beat (also when the grace note rings on under the pedal). A chord rolled from the bass up is written as one attack with an arpeggio sign, where it began; if the roll waits before its top note, the note before it is written as that note's grace note as well. One key (or chord) struck over and over very fast is one note with a tremolo sign. A fast sweep up or down the keyboard (six notes or more) is written as a run of small notes into its last note. A short trill that closes through the note below (main, above, main, below, main) is written with a turn sign. A tremolo that runs across a barline keeps its slashes on every tied note. In playback the small notes sound just before the note they lead to, a tremolo is struck again every thirty-second (two notes take turns), and a trill, turn or mordent over a chord is played on its top note while the notes under it are held. The job log says how many were found. On a server that has the multi-instrument model, a piano recording is heard by that model (it hears notes this short; the log says "the notes are the piano model's"); without it, most ornaments still arrive as ordinary notes.

A transcription is a draft. Expect to correct it — play it in the editor against your recording. Known limits: rhythms land on a grid of sixteenths, so triplets and swing come out as the nearest sixteenths; one tempo, metre and key for the whole recording; no dynamics, slurs or articulations; on the piano each hand is one line of chords, so a note held under moving notes is cut short at the next attack. A melody instrument is written as a single line — two notes at once keep the stronger one. To arrange a transcription for an ensemble, correct it first, download the MusicXML and give it to Arrange.

2. Arrangement options

Ensemble

Forty-plus presets across brass, woodwind, string, band, and piano-chamber families — duets, trios, quartets, quintets, up to Trumpet Septet (the trumpet presets are all trumpets; add a flugelhorn chair with + Chair for a custom roster), 10-part Brass Choir, British Brass Band (17 parts), Wind Ensemble, Beginning Band, Woodwind Choir, and full Concert Band (24 parts, percussion excluded by design). Piano-chamber presets (Piano Trio/Quartet/Quintet and the Violin/Cello/Clarinet/Flute/Horn Sonatas) render the piano as a real braced grand staff: right hand carries the upper harmony, left hand the bass — an honest sight-readable reduction, not invented figuration. The engine maps the most musically valuable source lines onto the ensemble's slots (lead, upper, middle, lower, bass), transposing correctly for each instrument.

Custom ensemble (Flex mode)

The roster under the ensemble dropdown is editable. Pick a preset (Brass Quintet, Concert Band, …) and add or remove parts to match the players you have; leave it untouched to keep that preset's voicing. Or pick "Custom ensemble — start from scratch" and add instruments one by one (2–32 parts). "3 flutes, 4 clarinets, 2 trumpets, a trombone and a tuba" is a perfectly good ensemble — the engine assigns lead/inner/bass roles from the instruments' registers. Piano adds as a grand staff (both hands). Everything else (register style, melody priority, corrections, chat fixes) works exactly as with a preset.

Target keys are explicit choices in the instrument list. Select, for example, Trumpet in C or Horn in G and the arrangement is written for that instrument before export; sounding pitch is preserved.

Pre-arrangement review

For score uploads, Review & arrange analyzes the source first and opens two tabs before any arrangement is made. In Target instruments, set the exact ensemble and written keys. In Lock source parts, check every original part that must pass through unchanged. Press Start arrangement only after both tabs are right; these choices are applied on the first arrangement pass.

A locked part reserves one target chair and keeps its original notation and transposition. You can lock several parts, up to the number of target chairs.

Register style

Player level

Who will play this? The level caps the written range of every part and adapts the writing to it — nothing is simplified rhythmically and no notes are invented; lines are placed whole in a range the player can reach.

Piano, voice and percussion parts are never narrowed.

Easy key

Checked, the whole arrangement is transposed to the nearest key the players read easily — judged by the written key signature of every part (brass and winds like up to two flats or one sharp; strings like C through A; keyboards two accidentals either way). The smallest shift that helps is taken, downward on a tie; a piece with no key signature, and a piece already in an easy key, are left alone. Independent of the player level — use it for any group that struggles with sharps or flats.

Piano reduction (Solo Piano and choir-with-piano)

With SATB Choir with Piano the singers get their own staves and the piano reduces everything they do not sing. Soloists get their own staff gives each vocal soloist a staff above the piano; unchecked, the soloist's line is part of the piano.

Melody priority

When checked, the engine runs its melody detector and uses it three ways: melody-carrying source parts win the competition for slots, the tune may trade between paired parts where the original passes it around, and duplicated lines are replaced with distinct missing material (register-matched). Recommended for orchestral reductions and anything where "who has the tune" matters. Costs some extra processing time.

3. The desk: the set sheet, outputs and buttons

The main page is a desk: your arrangements (sets) in a folder on the left, the selected set in the centre, and the New set panel on the right — which the pre-arrangement review (target keys, source locks) takes over while it is open. Each upload becomes a set that updates live.

The instrumentation sheet

A finished set opens on its instrumentation sheet, read from the arrangement's own plan: one row per chair — the written instrument, which source part it plays (in blue, with its role), any octave shift, and what was marked on it (bars filled from another part, partial-bar fills, redistributed or traded bars, tremolo sustained). The footer names every source part the arrangement does not play, and the options it was made with (player level, register, easy key, melody priority). It is a description, not a control: to change who plays what, use Source assignments ↓ (section 11) or the editor's passage actions (section 9).

Files and buttons

Outputs are listed one file per row, grouped as Files (the original source, the arrangement, the MuseScore file) and Fixed version (the edited arrangement); each row's actions — Open in editor, Download — sit at its right. Printing and PDFs live on the editor page only (section 6). Open in editor always opens a new browser tab, so closing the editor never closes this page. When it completes:

ItemWhat it is
Arrangement (MusicXML)The main output. The link downloads it; Open in editor opens it on the editor page (below) — score, playback, editing, score details and chat.
MuseScore file (.mscz)Opens directly in MuseScore for editing — the recommended path for corrections. Once you have made edits it is the edited (fixed) score that is converted, so what you open in MuseScore is what the editor shows; a piece of a collection or a saved version gets its own .mscz from its row (the download carries the piece's key).
Original source fileYour upload, unchanged. Throughout the app blue is the source and the app's own actions; red is what changed or needs a look (a fixed version, a warning, an edited note).
Fixed arrangementAppears once you apply any fix; the untouched original is always kept.
ExportsFiles the editor's Publish tab writes into a job's export folder (WAV, MP3, SVG / PNG, the merged print PDF) are kept for 24 hours, then removed — download what you want to keep; they can always be made again from the score.
Version — nameA named snapshot you saved in the editor (Save version…, section 10). Frozen: its own Open in editor, download and Print, never changed by later fixes.
Developer outputsThe arrangement plan and diagnostic log — useful when reporting bugs.
Source assignments ↓See and override which source part feeds each slot (section 11).
Upload correctionSend back your corrected version (section 13).
Archive / DeleteArchive folds the card away (everything kept, restorable); Delete removes it permanently.
Open in editor (set header)The set's main action: the editor page, in a new tab, on the arrangement's current file — the fixed version when fixes exist, else the original arrangement. Double-clicking the set in the folder does the same.

The folder

Finished and running sets are listed by title in the folder on the left of the desk, grouped by day, with a dot for status (green done, blue running, red failed, amber waiting for your review). Pick one and it opens in the centre: sheet, files, tools, log. The search box in the top bar filters by title, ensemble or id; archived sets sit in a collapsed group at the bottom.

4. The editor page

Everything you do with an arrangement — read it, play it, edit it, print it — happens on one page: Open in editor on the job card (or a double-click in the arrangements menu) opens /edit/<job>. A score that is not an arrangement — one in your Downloads folder, say — opens there too: File › Open a score… (Ctrl+O) in the editor, see the menu bar below. The page is laid out the way notation editors are — menus, a note-input toolbar, a score on a desk, a transport, a status bar — with only the controls Arrange It can honour — every edit is the same verified operation a chat fix produces, nothing is composed. Top to bottom:

AreaWhat is there
Menu barFile — New… and Import PDF… go to the desk's New set panel; Open a score… (Ctrl+O) opens a score file from anywhere on your computer — your Downloads folder included — through the browser's own file chooser: MusicXML (.musicxml, .xml, .mxl), MuseScore (.mscz), MIDI, MEI, ABC, Kern, or a PDF exported by notation software. It opens as it is, nothing arranged, in this tab — edit, play and print it like an arrangement; it is listed on the desk as an opened score (no instrumentation sheet), and an edited copy downloads as name_edited. A recording, a page image or a scanned PDF has to be transcribed first: use New set on the desk. Files of this score ▸ lists the open score's files (the arrangement, its fixed version, saved versions, the source; the one shown is ticked) and Open recent ▸ your other arrangements; Close returns to the desk; Save (a named version)… (Ctrl+S) keeps a read-only snapshot — every edit is already saved to the fixed version, which is why Save a copy… and Save to cloud… are listed but greyed, as are Save selection… and Publish to MuseScore.com… (not available; export a .mscz instead); Save as… and Export… open the Publish tab's Export (PDF, MusicXML, .mxl, MIDI, audio); Download ▸ .musicxml / .mid / .mscz; Project properties… is the Score details panel; Print… (Ctrl+P); Back to the desk; Quit closes the editor tab, Edit (Undo, Copy / Cut / Paste, Repeat, Select all, Delete, Go to bar…, Insert measures before / after…, Delete selected measures (Ctrl+Del), Split measure before selected note, Join selected measures — all score-wide, every part alike, as in MuseScore; Transpose… — MuseScore's dialog: to a key (closest / up / down), by an interval, or diatonically by scale degrees (alterations dropped, or kept with Keep degree alterations), over the selection or the whole score, key signatures optionally — a selection transposes one line into its own key, as in MuseScore: select the bars of one staff (click the first, Shift-click the last) and that staff's key signature changes with its notes from the first selected bar, the old key returning after the last one if the line goes on (untick Transpose key signatures to move the notes only); To key on a selection counts from that staff's own key as the page shows it (its written key, or the concert key with Concert pitch on); Find doublings… — lists every chair that plays the same line as another chair, in unison or an octave apart, over a run of bars (the lower chair is named), and offers to Silence it for those bars or Drop an octave where the instrument's range allows — each a single undoable edit, the list refreshes after each; Redo re-applies the last undone edit), View (Page view / Continuous (horizontal) / Continuous (vertical), Concert pitch, the Palettes / Properties / Layout panels, Mixer, Fix by chat, zoom), Add (Dynamic… (Ctrl+D), Articulation, Slur, Crescendo, Diminuendo, Breath, Tempo mark… (Alt+Shift+T)), Format (Reset beams — MuseScore's: the selected bars, or the whole score when nothing is selected, beamed by their time signature again, eighths and sixteenths grouped by the beat; a bar holding a tuplet keeps its beams) and Help. The piece title sits in the middle; the file selector — the arrangement, its fixed version (once fixes exist), every saved version, and the original source score (read-only) — on the right, with a note such as edited or read-only.
Tab rowHome (back to the arrangements), Score, Publish (print, one PDF per part, downloads). In the middle Parts opens a strip of tabs — one per chair showing that instrument alone, plus Score — and Mixer (F10) the per-part Mute / Solo / volume rows. On the right the playback cluster: ⏮ rewind, ▶ / ⏸, ■, 🔁 loop (the selected bars, else the whole piece), the metronome, ⚙ playback settings (speed, follow-cursor), the time (h:mm:ss:tenths), the position bar, bar.beat, the editable ♩ = N tempo, and undo / redo. Space plays and pauses whenever you are not typing in a text box, also right after clicking a button. Under the toolbars, above the score, the position bar with its own Play / Pause button (on a phone the ♩ = tempo box sits here too, at its right end): the played part in blue with a handle — drag the handle or click anywhere on the bar to move playback there (a tag shows the bar number while you drag; while stopped it sets where Play starts); ← → step a second (Shift: five), Home / End the ends.
Note-input toolbar✎ note input (N) and its mode (Re-pitch / Step-time — see Note input), the voice indicator (a note edit goes to the voice of the note you clicked — a piano staff with two voices says "voice 2" in the status bar; new notes are written in voice 1), the durations 64th … whole (keys 1–7), dot, rest, the accidentals 𝄫 ♭ ♮ ♯ 𝄪 and respell, tie and slur, the articulations marcato / accent / tenuto / staccato. Tuplet (Ctrl+Shift+3 = triplet, Ctrl+Shift+2…9) and remove tuplet, flip stem (X), and the voices 1–4 (Ctrl+Alt+1…4) — the selected note or bars move to that voice; a rest fills the spot they leave.
Sidebar (left)Three panels: Layout (F7, or I — MuseScore's Instruments panel) — each instrument's name and abbreviation (saved as a rename), an eye to hide a staff from the view, ↑ ↓ to move the instrument up or down the score, Replace with… to change the instrument (its notes keep their sounding pitch and are written for the new instrument's key and clef; notes outside its range are kept and counted), ✕ to remove the instrument and its music (click twice; Ctrl+Z brings it back), and Add instrument… at the bottom: a new staff of whole-bar rests with the score's time signatures, repeats and endings, its key written for its transposition (a piano comes as two braced staves). Tempo marks, rehearsal marks and system text stay on whichever instrument is at the top; "hide empty staves"; Properties (F8) — the selected note or passage, or, with nothing selected, the score details form (section 10); Palettes (F9) — Dynamics, Articulations, Beam properties, Falls & doits, Intervals, Lines (slur, hairpins, and the ottava lines 8va / 8vb / 15ma / 15mb — the notes sound where they are and are written an octave or two away under the line; No 8va takes the lines off the selection), Tempo, Breaths with a search box: select a note or passage, then click an item. Beam properties are MuseScore's: Auto beams the bar by its time signature again, No beam takes the note out of its beam, Break left starts a new beam at the note, Join joins its beam to the one before, Inner (8th) / Inner (16th) break the inner beams so only the eighth (or the eighth and 16th) beam runs on into the note. A new note value in a bar beams that bar by its time signature again. ‹ collapses the sidebar; the page remembers which panel was open.
The scoreA white page on a grey desk that scrolls on its own. The cursor follows playback and the page stays still — the view turns only when the cursor reaches a system that is off screen, as in MuseScore (switch it off under ⚙). An arrangement or its fixed version is editable here — click a note or a bar (section 9). Fix by chat (View menu) opens a drawer on the right (section 8).
Status barOn the left what is selected: "Trumpet in B♭ 2 · bar 12 · beat 3 · written C5 sounds B♭4 · quarter". A grand staff names its staves — "Piano (staff 2)" is the left hand — and two chairs with the same name are told apart by number; every edit goes to exactly that staff. On the right the Concert pitch checkbox, the view mode (Page view, Continuous (horizontal) — one endless line — or Continuous (vertical) — one endless column without the page frame), and the zoom: − / +, a percentage you can type (15–400 %), and a ▾ list of presets — 25 / 50 / 75 / 100 / 150 / 200 %, Page width, Whole page and Fit staves (the size at which every staff of one system fits the window height — the way to read a 20-part overture). Ctrl+wheel zooms too, and the bar under the middle of the window stays where it is; the zoom is remembered per arrangement.

The address bar carries the job and the file (?key=…), so a reload, a bookmark, and the browser's back and forward buttons all return to the same view. After your first edit the page switches to the fixed file by itself. Leaving the page stops the audio.

On a phone the File / Edit / View / Add / Format / Help menus sit on a second row of the menu bar (every menu ends with a Close row), the tab row wraps, the note toolbar scrolls sideways, the score keeps its own scrolling window and the Layout / Properties / Palettes panels sit BELOW it (scroll down past the score); the position bar carries Play and the ♩ = tempo box; the mixer opens as a sheet and the playback buttons dock at the bottom of the screen.

5. Playback

The playback cluster in the tab row plays a synthesized rendition with the cursor following the music: a thin blue line that moves through each bar with the sound (it waits for the sound to reach your speakers, so what you hear is what it points at). Its controls:

ControlWhat it does
⏮Back to the start.
▶ / ⏸Play and pause (also Space, and the position bar's own button — all three alike). If the sound is not ready yet (the page has just opened, or you have just edited), Play waits for it and starts by itself — the button pulses meanwhile; Esc or ■ cancels. As in MuseScore, selecting leaves the playback line where it is and the next Play starts from what you selected and carries on to the end: from a selected note every part plays; from a selected bar or passage only that staff plays. To hear everyone again, click the space between the staves (or press Esc): the selection clears and every part comes back at once, even while the music is playing. To stop at the end of a passage, use 🔁 loop. Pause keeps the position; Play resumes from it, and so does a selection already played from.
■Stop and return to the start.
RepeatsThe playback line, the page turns of a long score and "play from this bar" follow repeat barlines and first / second endings as the music plays them. A score with D.C. / D.S. / coda jumps plays them, but the line follows the page in written order.
🔁 LoopRepeats the looped section: the selected bars when you switch it on, or the markers set under ⚙ (Set loop marker left / right from the selection or the cursor's bar). Two blue flags on the score mark the section; with no markers the whole piece loops. ⏮ then rewinds to the loop's start.
MetronomeA click on the beat during playback (also the Metronome strip in the mixer).
⚙ SettingsThe tempo slider as a percentage of the notated tempo (50–150 %, without changing pitch; remembered on this device), Pan score automatically (turn the page for the cursor), the loop markers, the always-on Play repeats, and Count-in: one bar of clicks in the metre and tempo of the start position before the music begins (Stop during the count-in cancels it).
Position barDrag it (or click) to jump anywhere — the cursor and the audio move together, also while playing. The time reads hours:minutes:seconds:tenths; bar.beat is where the cursor is. Click either readout for Go to: a bar number or a time.
N % · ♩ = NThe playback speed as a percentage of the notated tempo, and the tempo at the cursor as played. Type into either and press Enter — ♩ = sets the speed relative to the tempo marked in the score at that point.
Mixer (F10)One vertical strip per part, laid out like a mixing board: a fader in a slot with a dB scale beside it (0 at the top, −6 at half travel, −∞ at the bottom; the Master runs to +3.5) and the value in dB under it, a ladder of VU lights up its left edge (green, amber, a red top — lit while the part sounds, from its notes' velocities, dark when it is muted or another part is soloed), Mute (silences that part), Solo (plays only the soloed parts — solo more than one to hear a section) and the part name at the bottom, plus a Metronome strip. Practise your own line against the others, or check a chord by hearing two parts alone.
− / 100% / + ▾The size of the score on screen (status bar; also Ctrl+= / Ctrl+− / Ctrl+0 and Ctrl+wheel): type a percentage, or pick a preset — Fit staves shows a whole system of a large score. Remembered per arrangement.

Export a selection. Tick the score and any parts in the Publish tab's Score and parts list (Select all / None — the same ticks drive Print), choose PDF, MusicXML (.musicxml or .mxl), MIDI or WAV, and whether you want one combined file or one file per item (a zip for the server formats, one download per part for WAV). PDF combines the rendered PDFs, so run Print first; the other formats are built from the arrangement on the spot. Print always shows the score as it is now: after an edit, or a change of page or staff size, it renders the pages again before opening them (at once when nothing changed), and a PDF export asks for a fresh render rather than handing out pages made before your last change. A part exported alone keeps the header and its name at the top, as the printed parts do.

Print settings. Above the Print button: page size (A4, Letter, A3, Legal, or the source's own page), staff size (6 mm small, 7 mm standard, 8.5 mm large, 12 or 16 mm large print for low vision, the Modified Stave Notation sizes) and margins, a style (Jazz = a handwritten look) and the music font (Leland, Bravura, Petaluma, MuseJazz, Finale Maestro, Finale Broadway, Gootville), the note spacing (normal, as MuseScore lays a score out; wide and wider put fewer bars on a line) and the parts' own staff size — a full score on a small staff beside parts on a standard one, as MuseScore's parts keep their own style. They apply to the score and every part; the parts always engrave rests of two or more empty bars as multi-measure rests. The choice is remembered with the arrangement and a change re-renders the PDFs.

Mixer. Every part that plays has a strip of its own, named after the part, however large the ensemble (past 15 parts the sound uses a second bank of MIDI channels, as MuseScore does, so a 24-chair band's trombones no longer share the first flute's sound). Each strip has volume, mute and solo, a pan slider (double-click to centre), a reverb slider and a sound menu — any General MIDI sound for the part, for this session (the sound bank is extended when needed); a chorus slider sits beside the reverb.

Image file. Image (.svg) and Image (.png) on the Publish tab save the page as it is drawn on screen (the first page in page view; the whole strip in continuous view).

Audio file. The Publish tab's Export offers Audio (.wav) and Audio (.mp3): both render the arrangement in your browser with the player's synthesizer and sound bank (a few seconds for a short piece; the sound bank is fetched once). WAV is the lossless master; MP3 is encoded at 192 kbit/s by the LAME encoder (lamejs, LGPL) in the browser too, so nothing leaves your machine.

Long scores. Once a score has more than about 320 staff-bars (bars times staves: a 100-bar quartet, a 20-bar full score) the page draws a window of about 240 staff-bars at a time — 60 bars of a quartet, 10 bars of a 24-stave band score, never fewer than 8 (drawing every bar of a 400-bar arrangement took the browser 45 seconds, and a phone never got there). The window follows playback and Go to bar, and the status bar shows Bars 41–80 of 401 with ‹ › to page through. Edits, exports and printing always cover the whole piece; Transpose › Whole score does too. View › Draw the whole score turns the window off if you prefer one long page.

On a phone. The editor page fits a phone: the menus sit behind the ☰ button, the player docks at the bottom with the tempo and count-in under ⚙, undo and redo sit in the tab row, the side panels open full screen, and the note-input toolbar scrolls sideways. Tap a note or a bar to select it (long-press and drag for a passage); the actions appear in a sheet above the player. Pinch with two fingers to zoom the score. The mixer scrolls sideways when there are more parts than fit.

Swing and ornaments. The playback settings (⚙) offer swing (eighths or sixteenths: the off-beat of every pair moves to two thirds, the usual swing feel); trills, mordents and turns are played out. The mixer has a master fader.

Count-in. The playback settings (⚙) offer a count-in: one bar of clicks in the metre and tempo at the start position before the music begins, the last click landing on the first beat.

Sound quality. Playback is a real SoundFont synthesizer running in your browser (the open-source MS Basic bank): every instrument family the presets can produce — brass, woodwinds, strings, voices and piano — has sampled sounds with dynamic layers, so louder notes have a different tone, not just more volume. The dynamics written in the score (pp, mf, ff and so on, including any you add in the editor) drive the velocity of every note, hairpins swell and fade between their dynamics, accents and marcatos weigh more, staccato notes play at half length and tenuto notes full length, and a fermata holds (the tempo halves under it) — the conventional engraving rules. The lead part is voiced slightly stronger than the others so the texture reads honestly. It is a rehearsal reference, not a recording.

First load. The sound bank (about 12 MB: the instruments the arranger writes for) downloads the first time you open the editor in a visit — a progress line shows under the playback controls — and stays cached in the browser afterwards, so later files start at once. Opening the original score (file selector → Original source score) when it uses other instruments (organ, guitar, percussion) fetches the full General MIDI bank on top, once (about 49 MB). The audio starts on your first click or key press on the page (browsers require a gesture before sound).

Switch between the original source, the arrangement and the fixed version in the file selector and A/B them by ear before you commit to a correction. Solo the same part in each to compare a single line.

6. Printing: score, parts and booklet

On the editor's Publish tab, tick the score and the parts you want in Score and parts (everything is ticked at first; Select all / None), set the page, staff size, style, font, margins, spacing and the parts' staff size, and press Print (File › Print, Ctrl+P, prints the same selection). The ticked items open as one PDF in a new tab, in your browser's PDF viewer — print or save from there, no MuseScore needed. The first Print renders the PDFs on the server (the button reads rendering 3/7 while it works); Re-render PDFs redoes them after you change the settings (an edit re-renders by itself). Every rendered file is also listed under Rendered PDFs (the arrangement page itself lists none):

Each file has a Print button that opens it in your browser's own PDF viewer — print, save or send from there. The link beside it downloads the file. For a collection every piece is rendered, and once you have applied a fix the fixed version is rendered too. Files are kept: pressing the button again after an edit re-renders only what changed.

If a part looks wrong on the page, fix it in the arrangement (chat, tap-to-fix, or MuseScore via the .mscz) and print again — the PDF is always a rendering of the arrangement, never edited on its own.

7. Review arrangement — the automatic checker

In the editor's Fix by chat tab, press Review arrangement. The app compares the arrangement against your original, measure by measure and note by note, and produces a numbered findings list:

FindingMeaning
coverage holeThe original has music where every arrangement part is silent.
missing melodyA detector-confirmed melody passage absent from all parts.
missing lineAny source line — counter-melody, inner run, echo fragment — whose content appears nowhere. Echoes are recognized as such: the suggestion sends the answer to the partner voice (Tpt 1 states, Tpt 2 answers).
buried melodyThe tune sits below the section lead; suggests a swap.
fragmented lineOne continuous source line split mid-phrase between two parts; suggests swaps to reunify it.
rangeNotes outside the instrument's playable range; suggests octave moves.
dynamicsThe source has dynamics the arrangement lost (report only).

Click a colored badge to apply that fix instantly. The row is struck through with a green check; the list stays put so you can click down it. You can also type fix 3, 7, 12. Everything is reversible: undo, undo 3, reset fixes.

The review runs against the fixed version once fixes exist — the banner tells you which version it examined. With 40 source parts going into 5–7 instruments, many "missing line" findings are honest trade-offs, not errors: treat the list as a menu, not a to-do.

8. Fixing by chat: plain language and commands

Open the editor's Fix by chat tab (top bar). Fixes apply to the file shown — the arrangement or its fixed version — and the score re-renders after each one. Type what you want in the box, then:

Plain language works: "add the clarinet parts to trumpet 6 at m32", "raise trumpet 3 an octave in bars 40–52", "put a slight pause before the coda", "copy Horn 1 bars 60–69 into Trumpet 4". The assistant may ask to see specific bars before answering — that's normal. Every request becomes checked, reversible operations: the AI can never write notes freely, so it cannot corrupt a score. A rate limit, a server error or a timeout on the AI's side is retried once by itself after two seconds, and a reply that was cut short is asked for again with a larger budget — you only see a message when the second attempt fails too. One request runs at a time: pressing Enter or Apply again while one is in flight is ignored with a note, so an edit is never applied twice.

Useful commands: fix N (apply review finding N), show fixes (list what's applied), undo / undo 2 / reset fixes. Common operations include octave/semitone transposition, muting, copying from the original, doubling another part, swapping parts, dynamics, hairpins, articulations, slurs, breath marks, range floors/ceilings, and the melody macros promote melody and ensure coverage.

Editing commands (the same operations the score editor uses; bar numbers are the ones printed on the score, beats count from 0 in quarter notes): move <part> bars 12-19 to <part> (or copy …; the passage is re-written for the receiving instrument's key and placed in its range by whole octaves, the source bars become rests on a move), set duration <part> m5 beat 2 to 1.5 (standard values only; lengthening writes over what follows, as MuseScore does, shortening leaves a rest), tie <part> m5 beat 3 (tie to the next note of the same pitch, or untie), delete note <part> m5 beat 1, add note G4 <part> m5 beat 1 length 1 (written pitch, into a rest only — nothing is written over sounding notes), and remove dynamics / slur / hairpin [<part>] 5-8. Several edits applied together count as one fix for undo.

Rules every command follows, in chat and from the score editor alike:

Paste and repeat: paste bars 3-6 of <part> at bar 20 repeats a passage later in the same part; paste bars 3-6 of <part> at bar 20 of <part> lands it on another chair (move … at bar 20 leaves rests behind; copy <part> bars 3-6 to <part> at bar 20 works too). The bars must exist in the receiving part — nothing is ever added to the score — and must have the same time signature bar for bar; on one part the two ranges may not overlap. Scale steps: step up <part> m5 beat 2 / step <part> m5 beat 2 down 2 moves one note by degrees of the key signature at that bar (in G major F♯ steps to G, an out-of-key note snaps to the nearest degree in that direction; the note's range is not checked — you are editing on purpose). set <part> m5 beat 2 to Bb4 names an exact written pitch — always with its octave. delete notes <part> bars 3-6 turns every note of those bars into rests. Note values for set duration run from a 64th to a whole note, dotted values included (for example 1.5 = dotted quarter, 0.75 = dotted eighth).

9. Editing the arrangement on the score

After each edit the score re-draws at once, and the sound is prepared as soon as you pause editing, so Play after an edit starts at once. Pressed right on the heels of a key, Play waits for that edit (about half a second) and plays it — never the version before it; press Play again meanwhile to cancel. Playback keeps its place through edits: paused, Play resumes where the line stands; while listening, the music carries on with the edit in it. A part tab or a hidden staff stays as you set it.

On the editor page, the arrangement and its fixed version are editable on the score itself (saved versions and the source are read-only). The editor uses the selection gestures and keys notation-editor users already know (MuseScore, Sibelius and Finale players will feel at home) and is built for what arrangers actually change: a passage on one chair moved, lowered, silenced or restored, with single-note fixes second. It is not a notation program: the notes are never typed in freely, every edit is the same verified operation a chat fix produces, and everything is reversible.

Selecting

Passage actions (a selection of bars)

ActionWhat it does
Move to…Hands the passage to another chair; this chair rests.
Swap with…Exchanges the passage with another chair, bar for bar.
8va ▲ / 8vb ▼ (Ctrl+↑ / Ctrl+↓)The whole passage an octave up or down; ↑ / ↓ alone move it a semitone.
Silence (Delete)Replaces the passage with rests.
Restore from source…Copies the bars from a part of the original score (re-pitched for this instrument's key) — the way to bring back a dropped line.
Copy / Cut / Paste (Ctrl+C / X / V)Copy a passage, select the first bar of the destination on any chair, paste: the bars land there (replacing what was there), re-pitched for the receiving instrument. Cut moves instead. The clipboard lives on this page.
Repeat (R)Copies the passage into the bars right after it.
Breath at endShortens the last note of the passage for a breath.
Slur (S), Cresc. (<), Dim. (>), Dynamic…A slur or hairpin over the passage; a dynamic at the start of each selected bar. Also in the Palettes panel and the Add menu.

Note actions (a note, a range of notes or a Ctrl-click list)

ActionWhat it does
↑ / ↓ (♯ step / ♭ step)A semitone up or down, spelled in the direction of travel: up adds a sharp (C → C♯), down a flat (D → D♭), and a step that lands on a natural takes it (D♭ up → D, C♯ down → C, E up → F). Never a double accidental. The note moves on the page the instant the key is pressed; the exact engraving (stems, beams, ledger lines, accidentals) is redrawn once you pause, and the server's confirmation follows behind.
Ctrl+↑ / Ctrl+↓ (8va ▲ / 8vb ▼)The note an octave up or down. Octave moves are drawn at once and the server confirms behind the page; Undo of a pitch edit moves the note straight back the same way; a move that would take a note outside the instrument's playable range is refused with a message and nothing changes; a key pressed while an edit is still being applied is queued (the status bar says Queued) and a run of queued edits is applied as one batch — one Undo step (a step that changes the bars or the signatures of the whole score, such as inserting bars, is applied on its own).
Alt+Shift+↑ / ↓A step of the scale up or down (needs the latest server).
Alt+2…9 / Alt+Shift+2…9 (Intervals palette)Adds a note that interval above the chord's top note (Alt) or below its bottom note (Alt+Shift) — a second … a ninth, counted in letter names and spelled in the key signature, as in MuseScore (F + a third in G major is A; F♯ + a third in C major is A). The new notehead appears at once. On every note of a list or range; in note input, on the note just entered.
Delete, 0, rest buttonReplaces the note with a rest.
1–7, the duration buttonsThe written value: 1 = 64th, 2 = 32nd, 3 = 16th, 4 = eighth, 5 = quarter, 6 = half, 7 = whole; . adds or removes the dot; W doubles, Q halves. Lengthening writes over what follows, as in MuseScore: a note the longer value covers is replaced (its slur goes with it), a note it covers in part keeps the rest of its length, and a value that runs past the barline is tied into the next bar. Inside a tuplet only the rests that follow are taken. The page writes the change itself and redraws the bar at once, while the server confirms behind it; pressing the value a note already has does nothing.
𝄫 ♭ ♮ ♯ 𝄪The note's letter with that accidental (F♯ → F♭ is two semitones). The respell button (J) writes the same sound the other way (C♯ ↔ D♭).
Tie (T)Ties the note to the next note of the same pitch, or removes the tie.
Tuplet (the 3 button; Ctrl+Shift+3 = triplet, Ctrl+Shift+2…9)The selected note or rest becomes the first of a tuplet of the same total length, followed by tuplet rests — then type the notes into those rests (N, letters). The ratio is the standard one (3:2, 5:4, 6:4, 7:4, 9:8; duplet 2:3, quadruplet 4:3). The 3̸ button removes the tuplet at the selected note, leaving a rest.
Voices 1–4 (the 1–4 buttons; Ctrl+Alt+1…4)Moves the selected note, or every note of the selected bars, into that voice; a rest takes its place, and the receiving voice must be silent there. Rests of the other voices can be selected and filled by note input like any rest. A voice that holds only rests disappears again.
Slur (S)From this note to the next; Ctrl-click the end note first and S slurs the span; select a passage for a longer slur.
< / >A crescendo / diminuendo hairpin from this note to the next (over the passage when bars are selected).
Staccato / accent / tenuto / marcato (Shift+S / V / N / O)Toggle the articulation — on every note of a Ctrl-click list or of a selected passage at once. The mark appears on the page the instant you add it — so do slurs, ties, hairpins, dynamics and text — and the exact engraving replaces it a moment later.
More articulations (Articulations and Falls & doits palettes)Staccatissimo, stopped (brass +, closed), harmonic (o), down bow and up bow, and the jazz brass doit, fall, scoop and plop — each toggles on the selected note (every note of a list or passage). Staccatissimo plays at a quarter of the note; the others are written, not played.
Dynamic… (Ctrl+D)A small popup: click a dynamic, or type it (pp, mf…) and press Enter or Esc. Choosing another dynamic at the same place replaces it.
Time / key signature, clef, barline, endings, repeats & jumps (Add menu ▸ submenus; Clefs / Key signatures / Time signatures / Barlines / Repeats & jumps palettes)A time signature from the selected bar re-bars every part up to the next signature (a note across a new barline is tied); a key signature goes on every staff in its own written transposition, notes keep their pitches; a clef goes on the selected staff at the bar (or at the selected note); barlines (double, final, dashed, start / end repeat…) at the end of the selected bar on every staff — End repeat, played … times sets MuseScore's play count (2–10) and playback repeats the section that often; first / second endings over the selected bars; Segno, Coda, Fine, D.C. and D.S. (al Fine / al Coda) at the bar. Playback follows repeats, endings and jumps.
Grace notes, Arpeggio, Glissando, Breaks (Add menu; Enter / Ctrl+Enter)An acciaccatura or appoggiatura before the selected note (the scale step above; select it and use the arrows to change its pitch), an arpeggio on a chord (toggles), a glissando to the next note, and a system or page break after the selected bar (Enter / Ctrl+Enter; honoured in page view and in print). In note input, Shift+A…G adds that letter's nearest pitch above the note as a chord. Voices 1–4 (Ctrl+Alt+1…4); tuplets Ctrl+Shift+2…9.
Explode / Implode (Add menu)Explode splits the chords of the selected bars of this staff over the staves below (top note stays, the next goes down, the lowest is doubled when there are more staves than notes; the lower bars are rewritten); Implode joins what the staves below play at the same beats into chords on this staff (the lower staves stay).
MIDI keyboard (the 🎹 toolbar button)With note input on, a key played on a connected MIDI keyboard enters that pitch (written for the staff's transposition) — Web MIDI, Chrome and Edge. Keys played, letters typed and 0 rests pressed while the previous note is still being entered wait their turn and land on the following notes, in order.
Lyric (Ctrl+L), Chord symbol (Ctrl+K), Notehead ▸, Colour…, Toggle visible (V), Flip stem (X), Note names / Colour notes (Add menu)MuseScore's inspector and plugins on the selected note (or bars): a lyric syllable (verse 1; empty removes), a chord symbol above the bar (played back as MuseScore does: a Chord symbols strip in the mixer plays each symbol on a piano, in close position, until the next one), a notehead shape, a colour (#rrggbb; empty resets), hide / show the element, flip its stem; Note names writes each note's written name above it over the selected bars and Colour notes colours them by pitch (Boomwhackers) — teaching aids that switch off again.
Text (Add menu / Text palette)Staff text, expression text (italic, below the staff; Ctrl+E), rehearsal mark (above the system; Ctrl+M) and system text (Ctrl+Shift+T) at the selected note's beat or the start of the selected bar, typed into a small prompt. Remove text at selection takes them away again.
Ornaments (palette)Trill, mordent, inverted mordent, turn, inverted turn and single-note tremolo toggle on the selected note (or every note of a list or passage). Beginner and intermediate parts are rendered without ornaments; edits add them back. Playback does not realise ornaments.
Breath / Caesura / FermataPalettes › Breaths & pauses. Breath shortens the note and writes the mark; Caesura (//) toggles on the note; Fermata toggles on the note or rest — on every note of a Ctrl-click list or a selected passage at once; playback holds it.
Tempo (Alt+Shift+T)A metronome mark at the note's bar in the time signature's beat; the Tempo palette offers ♩ = 60 … 160 and Adagio / Andante / Moderato / Allegro / Presto.

Note input (N)

Press N (or the ✎ button) with a note selected: a blue caret marks the note under the cursor. A letter A–G replaces that note's pitch, in the octave nearest the previous note (−, + or = before the letter for flat, sharp or natural; Ctrl+↑ / ↓ afterwards for the octave); on a rest the letter adds a note of the current duration into it. 0 turns the note into a rest, 1–7 and . choose the duration for the next note, T ties, and ← → move the caret over notes and rests. The caret advances after each entry, at once: each letter or rest appears the moment you type it (a note typed into a rest is sketched until the engraving catches up, a fraction of a second later), so you can type a run of notes without waiting. Esc or N leaves note input. Note input starts with the value of the selected note, as in MuseScore.

The box beside ✎ picks the mode, as MuseScore's input-mode menu does. Re-pitch (the default) is the above: a letter changes the pitch of the note under the caret and keeps its rhythm and marks; on a rest it adds a note into the rest, and a note that would run into the next one is refused with a message. Step-time is MuseScore's default: a letter writes a note of the chosen value over whatever is there — notes it covers are replaced (their slurs go), a note it covers in part keeps the rest of its length, a value that runs past the barline is tied into the next bar — and the caret moves on by that value. The page remembers the mode.

Keyboard

The keys are the ones notation editors share — see the shortcut table. In short: ← → move by note (a note selected) or by bar (bars selected), Ctrl+← → by bar; Alt+↑ ↓ jump to the chair above or below; Shift+arrows extend; Home / End / PgUp / PgDn scroll; Ctrl+F goes to a bar; Ctrl+Z undoes.

Undo and versions

Every edit is applied to a copy: the card gains a Fixed arrangement beside the original, and the editor switches to it — the file selector shows "with fixes" and the menu bar reads edited. Undo (Ctrl+Z, the ↶ button, Edit menu) removes the last edit exactly and puts back the very file you had before it; it takes the same short time however many edits you have made (the score is restored in place and checked against that file). When the check cannot be made — after a change to the bar count, a time or key signature, or a reload — the fixes are replayed from the untouched original instead, which takes a little longer. Undoing the last edit removes the fixed copy. An Undo pressed while an edit is still being applied is done right after it. Chat fixes, the review checker, the panels and the editor share one edit list, so undo in chat and Undo here are the same thing. A replayed undo can occasionally answer "Undo refused…" — one of the edits that would remain cannot be re-applied on its own (it depended on the one being removed); the score is then left exactly as it was, and undoing one more step, or reset fixes, gets past it. Redo (Ctrl+Shift+Z or Ctrl+Y, the ↷ button, Edit › Redo) re-applies the last undone edit; every undone edit can be redone in turn until you make a new edit, which forgets the undone ones.

Written and concert pitch

The score shows each part as its player reads it (written pitch, as the file carries it). Concert pitch in the status bar (or the View menu) shows every part at sounding pitch instead; the status bar then gives the written note beside it, and every edit is still applied to the written note. Octave and step changes work either way.

Only bars whose notes sit in one voice can be edited note by note; a bar with two voices on one staff can still be moved, silenced or shifted as a passage.

Keyboard shortcuts

KeysAction
SpacePlay / pause, from anywhere except a text box, an open menu or a dialog — a button you have just clicked does not take it (Enter presses a focused button). Pressed while the sound is still loading, Play waits and starts by itself: the Play buttons pulse and “Loading the sound…” shows beside the position bar; pressing again changes nothing, Esc or ■ cancels.
F7 / F8 / F9 / F10Layout / Properties / Palettes panel · Mixer (Ctrl+F9 searches the palettes; I opens Layout)
Ctrl+O · Ctrl+S · Ctrl+POpen a score from your computer… · Save version… · Print (PDF)
Ctrl+= · Ctrl+− · Ctrl+0 · Ctrl+wheelZoom in · out · 100 % · zoom with the mouse (Shift+wheel scrolls sideways)
Ctrl+D · Alt+Shift+TDynamic popup · tempo mark
← → · Ctrl+← →Previous / next note (or bar) · previous / next bar
Alt+↑ ↓The chair above / below
Shift+← → · Ctrl+A · EscExtend the passage · select the staff · clear
Home / End · PgUp / PgDn · Ctrl+Home / EndScroll to the left / right edge · a screen up / down · the top / bottom
Ctrl+FGo to bar…
Ctrl+ZUndo; Ctrl+Shift+Z or Ctrl+Y redo
Ins / Ctrl+DelInsert measures before the selection / delete the selected measures (every part)
Ctrl+C · Ctrl+X · Ctrl+V · RCopy · cut · paste · repeat the passage (with a selection on the score; without one the browser copies page text as usual)
DeleteRest(s) in place of the selection
↑ ↓ · Ctrl+↑ ↓ · Alt+Shift+↑ ↓Semitone · octave · scale step
Alt+2…9 · Alt+Shift+2…9Add an interval above · below the note
1 – 7 · . · W · Q64th … whole · dot · double · halve
0Rest
T · S · JTie · slur · respell
Shift+S · Shift+V · Shift+N · Shift+OStaccato · accent · tenuto · marcato
< · >Crescendo · diminuendo over the passage
N · A–G · − + = · 0Note input on / off · pitch · flat, sharp, natural before the letter · rest

10. Score details, tempo and versions

Where it is. File › Project properties…, or tap the piece title in the top bar, opens the form (the Properties panel with nothing selected): title, subtitle, composer, arranger, lyricist, the tempo mark, the part names and abbreviations, and the saved versions.

Your original header stays. An arrangement keeps the source's title, subtitle, composer and any other header line exactly as they were, at their places on the page — from MusicXML, MuseScore and PDF sources alike (a PDF's printed header is read off the page). Only a source with no header at all gets a generated title and "for <ensemble>" line; nothing invents a composer. Edit any of it here.

The Properties panel of the editor's sidebar (F8) shows the score details form whenever nothing on the score is selected; it edits what the page prints, without MuseScore:

Save changes applies everything as ordinary fixes and re-renders the score. They are reversible like any fix — type undo in the chat tab — and the Fixed arrangement, the .mscz and the PDFs all pick them up.

Versions

Save version… in the top bar (or Save as version… in the panel) stores the file as it is right now under a name you give it ("Concert copy", "Before the trumpet lift"). A version is a frozen snapshot: it appears in the file selector and on the job card with its own download and Print, and later fixes never touch it. Use it before an experiment, or to keep a version for each group you rehearse. Versions list in the panel with Open and Delete; a version's own panel is read-only.

Tempo marks are not drawn on screen — check them in the panel, in the .mscz, or on the printed PDF.

11. Choosing the source parts yourself

Source assignments ↓ on a completed card shows which original part feeds each instrument, with the engine's reasoning. If it chose wrong — say it kept the violas and dropped Violin 1 — pick the parts you want per slot and re-arrange. A new job is created with your choices; the original stays. A choice that cannot be honoured (a part name the source does not have, a slot that does not exist, two slots claiming the same lock) is refused on the spot with a message saying which — no failed job is created.

To preserve an original part exactly, select it in the pre-arrangement Lock source parts tab. The same controls remain available under Keep source parts unchanged on a completed job if you later want to create a different version. Every source part is lockable, and you may lock several at once. Each locked part reserves one chair and bypasses redistribution, register changes, and transposition. For example, lock Trumpet 1 and Trumpet 2 in D, then arrange the remaining material for a total of seven or eight trumpets.

On dense orchestral scores, check the assignments before spending ear-time: thirty seconds here can save a half hour of fixes.

12. PDF scores (OMR, beta)

PDF uploads run optical music recognition and produce a faithful transcription for review — errors are expected (≈85–90% note accuracy on clean engravings). A correction panel highlights suspect spots on a heatmap with per-note actions (♭/♯, octave up/down, delete), and Arrange corrected → then arranges your corrected copy. Not enabled on the public server yet — export MusicXML from the source instead when you can.

13. Uploading corrections — the most valuable thing you can do

When an arrangement is worth keeping but needs your hand: download the .mscz, correct it in MuseScore (registers, missing lines, voicings, repeats — anything), and post it back with Upload correction (.mscz or exported MusicXML both work). The app stores your version next to the engine's and shows a per-part summary of what you changed.

This is the calibration loop: your corrections are measured, patterns are found, and the engine is adjusted — several current behaviors exist because corrections proved the old ones wrong. Uploading a correction is the single strongest signal a tester can send.

Keep MuseScore reasonably current; the server reads files from MuseScore 4.7 and earlier. If a correction upload is refused, export MusicXML from MuseScore and upload that instead.

14. The recommended workflow

  1. Upload the score; pick the ensemble; choose register style (centered for marches/concert works, standard for songs/swing); set the player level (and easy key) for a school or community group; check Melody priority for orchestral material.
  2. Check Source assignments on dense scores — fix any obviously wrong picks and re-arrange before listening.
  3. Open in editor and listen once through.
  4. Review arrangement — click down the badge column for the findings your ear agrees with. undo anything that sounds worse.
  5. Fix on the score: select a passage or a note on the score and use the toolbar (move, octave, silence, restore from source); the chat tab for anything the toolbar doesn't cover.
  6. Spot-fix details by chat or tap-to-fix.
  7. Score details in the editor's Properties panel (F8): set the title, composer and arranger, rename parts for the stand, check the tempo marks — and save a version before you experiment.
  8. Print (PDF) for the stands — score, parts and the booklet, each with a Print button; .mscz when you want to edit in MuseScore.
  9. Correct in MuseScore and upload the correction.

15. Limits and known behaviors

16. Reporting problems

The most useful report names the piece, the ensemble, the bar numbers, and what you expected to hear — e.g. "Gabrieli septet, m2–9: the echo answers are missing." Attach or reference the job's diagnostic log (Developer outputs → log → Copy) for crashes. If plain language chat refuses something it should understand, report the exact sentence — refused requests are logged and drive the next round of capabilities.

Thank you for testing. Every piece you run, every fix you click, and above all every correction you upload makes the arranger better.

MuseScore is a trademark of Muse Group; Sibelius, Finale and Dorico are trademarks of their owners. Arrange It is not affiliated with or endorsed by any of them — it reads and writes their files and speaks the notation-editor conventions their users know. Open-source components and their licences are listed in the third-party notices.